Lexmark XC6152 User Manual Download Page 234

Page: 234 / 301

Action

Yes

Step 3

Check if the trays are linked.

For more information, see

“Linking trays” on page 30

Print the document.

Is the document printed from the correct tray?

The problem is
solved.

Contact

customer

support

Print quality is poor

Blank or white pages

Note:

Before solving the problem, print the quality sample pages to determine the missing color. From the

home screen, touch

Settings

Troubleshooting

Print Quality Test Pages

Action

Yes

Step 1

Remove, and then insert the imaging unit.

Warning—Potential Damage:

Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs..

Print the document.

Is the printer printing blank or white pages?

Go to step 2.

The problem is
solved.

Step 2

Replace the imaging unit, and then print the document.

Is the printer printing blank or white pages?

Contact

customer

support

The problem is
solved.

Troubleshooting

234

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands