Lexmark XC6100 Series User Manual Download

Page: 115 / 177

Action

Yes

Step 6

Temporarily disable the Web proxy servers.

Note:

Proxy servers may block or restrict you from accessing

certain Web sites including the Embedded Web Server.

Are the Web proxy servers disabled?

Go to step 7.

Contact your
administrator.

Step 7

Access the Embedded Web Server again by typing the correct IP
address in the address ﬁeld.

Did the Embedded Web Server open?

The problem is
solved.

Contact

customer

support

Unable to read ﬂash drive

Action

Yes

Step 1

Check if the ﬂash drive is inserted into the front USB port.

Note:

The ﬂash drive does not work when it is inserted into the

rear USB port.

Does the problem remain?

Go to step 2.

The problem is
solved.

Step 2

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 27

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check if the front USB port is disabled.

Does the problem remain?

Contact

customer

support

The problem is
solved.

Enabling the USB port

From the home screen, touch

Settings

Network/Ports

USB

Enable USB Port

Checking the printer connectivity

From the home screen, touch

Settings

Reports

Network

Network Setup Page

Check the ﬁrst section of the network setup page, and conﬁrm that the status is connected.

If the status is not connected, then the LAN drop may be inactive, or the network cable may be
malfunctioning. Contact your administrator for assistance.

Troubleshooting

115

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands