Lexmark XC6100 Series User Manual Download Page 27

Page: 27 / 177

From the display, touch the document that you want to print.

If necessary, conﬁgure other print settings.

Send the print job.

To print another document, touch

USB Drive

Warning—Potential Damage:

Do not touch the printer or the ﬂash drive in the area shown while actively

printing, reading, or writing from the memory device. Loss of data or a malfunction can occur.

Supported ﬂash drives and ﬁle types

Flash drives

•

Lexar JumpDrive S70 (16GB and 32GB)

•

SanDisk Cruzer (16GB and 32GB)

•

PNY Attaché (16GB and 32GB)

Notes:

–

The printer supports high

‑

speed USB ﬂash drives with full

‑

speed standard.

–

USB ﬂash drives must support the File Allocation Table (FAT) system.

File types

Documents:

•

.doc or .docx

•

.xls or .xlsx

•

.ppt or .pptx

•

.pdf

•

.xps

Printing

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Lexmark XC6100 Series, User Manual, Page: 27 / 177

Search results

Summary of Contents for XC6100 Series

Reviews: