•
For information on how to configure the application settings, see the
Customer Support Administrator’s
Guide.
1
From the home screen, touch
Customer Support
.
2
Print or e
‑
mail the information.
Setting up Device Quotas
Notes:
•
This application is supported only in some printer models. For more information, see
•
For information on how to configure the application settings, see the
Device Quotas Administrator’s
Guide
.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Apps
>
Device Quotas
>
Configure
.
3
In the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
Managing bookmarks
Creating bookmarks
Use bookmarks to print frequently accessed documents that are stored in servers or on the web.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Bookmarks
>
Add Bookmark
, and then type a bookmark name.
3
Select an Address protocol type, and then do one of the following:
•
For HTTP and HTTPS, type the URL that you want to bookmark.
•
For HTTPS, make sure to use the host name instead of the IP address. For example, type
myWebsite.com/sample.pdf
instead of typing
123.123.123.123/sample.pdf
. Make sure that
the host name also matches the Common Name (CN) value in the server certificate. For more information
on obtaining the CN value in the server certificate, see the help information for your web browser.
•
For FTP, type the FTP address. For example,
myServer/myDirectory
. Enter the FTP port number.
Port 21 is the default port for sending commands.
Set up, install, and configure
26
Summary of Contents for XC4342
