Lexmark XC4100 Series User Manual Download

Page: 15 / 158

Understanding the status of the power button and
indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Red

The printer requires user intervention.

Power button light

Printer status

Off

The printer is off, ready, or processing data.

Solid amber

The printer is in sleep mode.

Blinking amber

The printer is in hibernate mode.

Using the home screen

Note:

Your home screen may vary depending on your home screen customization settings, administrative

setup, and active embedded solutions.

Touch

Copy

Make copies.

‑

mail

Send e

‑

mails.

Change Language Change the language on the printer display.

Fax

Send fax.

Settings

Access the printer menus.

Held Faxes

Show all the current held fax jobs.

Note:

If Held Faxes is hidden, then Release Held Faxes appears.

Shortcut Center

Organize all shortcuts.

Learning about the printer

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands