Lexmark XC2326, User Manual

Page: 66 / 254

Fax
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
Note: The ADF is available only in some printer models.
•
Use the ADF for multiple
‑
page or two-sided
documents.
•
Load an original document faceup. For multiple
‑
page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
•
Use the scanner glass for single
‑
page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
Sending a fax
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 24 .
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax , and then enter the needed information.
If necessary, adjust the settings.
3
Send the fax.
Using the computer
Before you begin, make sure that the fax driver is installed. For more information, see “Installing the fax driver”
on page 45 .
For Windows users
1
From the document that you are trying to fax, open the Print dialog.
2
Select the printer, and then click Properties , Preferences , Options , or Setup .
Fax 66