Lexmark XC2326 User Manual Download Page 137

Page: 137 / 254

Print

Menu item

Description

Print Fonts

PCL Fonts

PostScript Fonts

Print samples and information about the fonts that are available in each printer
language.

Print Demo

Demo Page

Print a demo page that is used as a diagnostic tool for print problems.

Shortcuts

Menu item

Description

All Shortcuts

Print a report that lists the shortcuts that are stored in the printer.

Note:

Fax Shortcuts appears only in some printer models.

Fax Shortcuts

Copy Shortcuts

‑

mail Shortcuts

FTP Shortcuts

Network Folder Shortcuts

Fax

Note:

This menu appears only if Fax is conﬁgured, and Enable Job Log is set to On.

Menu item

Description

Fax Job Log

Print a report about the last 200 completed fax jobs.

Fax Call Log

Print a report about the last 100 attempted, received, and blocked calls.

Network

Menu item

Description

Network Setup Page

Print a page that shows the conﬁgured network and wireless settings on the
printer.

Note:

This menu item appears only in network printers or printers connected

to print servers.

‑

Fi Direct Connected Clients

Print a page that shows the list of devices that are connected to the printer using
Wi

‑

Fi Direct.

Note:

This menu item appears only when Enable Wi

‑

Fi Direct is set to On.

Use printer menus

137

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands