Diagnostic Information
2-21
4520-xxx
Duplex Unit Sub Error Codes
Status byte 4 contains the most valuable information to help isolate a
failing part or assembly in the duplex unit and is the only byte
contained in the following table.
Status
Byte 4
Explanation
00
No duplex error. No problem was reported to the engine by the
duplex system card.
01
The leading edge of the sheet of paper never arrived at the input
sensor.
02
The duplex unit engine board never received media notification
from the printer.
03
The trailing edge of the sheet of paper never cleared the input
sensor.
04
The leading edge of the sheet of paper never arrived at the exit
sensor.
Note: This error is the most common due to the long length of the
paper path between the input sensor and the exit sensor.
05
The duplex logic thinks a sheet of paper is feeding to the duplex
unit due to a sensor malfunction in the paper path when in fact the
printer has not sent a command to send a sheet of paper to the
duplex unit.
06
The exit sensor detected a sheet of paper too early.
07
The sheet of paper trailing edge did not clear the exit sensor in the
desired length of time.
08
The feed motor experienced a complete motor stall.
0E
The D.C. motor is under speed. The motor never reached the
correct operating speed.
13
There is paper left in the duplex unit. Paper was sensed during
the homing operation during POST.
15
There is paper left in the duplex unit. Paper was sensed during
the D.C. motor diagnostic test during POST.
18
The D.C. motor experienced an acceleration error.
3D
There is paper left in the duplex unit. Paper was sensed during IR
clear during POST.
Summary of Contents for T52 Series
