Lexmark Pro5500 Series, Service Manual

Page: 89 / 277

Diagnostic information
2-46
Marketing Name
Go Back
Previous
Next
Attendance messages
User prompts
Error Action
Alignment problem Try one or more of the following:
• Load only plain, unmarked paper when aligning the cartridges.
The printer will read any markings on used paper, which could
cause the alignment error message to appear.
• Touch Cancel to clear the message.
Cannot Collate Job Try one or more of the following:
• Touch Continue to print the pages that were saved in the printer
memory, and then collate the remainder of the print job.
• Touch Cancel Printing to cancel the current print job.
Card Access Error Try one or more of the following:
• Remove the memory device, and then reinsert it into the card slot or
USB port.
• Touch OK to clear the message.
Change [Paper source] to
[Custom String]
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch
Paper Loaded , Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press to cancel the current job.
Change [Paper source] to
[Custom Type Name]
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch
Paper Loaded , Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press to cancel the current job.
Change [Paper source] to
[Size] Paper Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch
Paper Loaded , Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press to cancel the current job.
Change [Paper source] to
[Size] [Type] Paper Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch
Paper Loaded , Continue to continue printing after loading
the correct paper size and paper type in the default paper tray.
• Press to cancel the current job.