Lexmark Pro5500 Series, Service Manual, Page: 144 / 277

3-7
Service Manual
4447-20x
Go Back
Previous
Next
Edge to Edge Printing
This setting allows the user to enable or disable this feature.
To change this setting:
1.
From the Configuration Menu, navigate to Edge to Edge Printing .
2.
Select On or Off .
3.
Touch to save the setting, or touch to return to the Configuration Menu without saving any
changes.
Media Card Slots
This setting allows the user to enable or disable the media card slot.
To change this setting:
1.
From the Configuration Menu, navigate to Edge to Edge Printing .
2.
Select Enable or Disable .
3.
Touch to save the setting, or touch to return to the Configuration Menu without saving any
changes.
PictBridge Port
This setting allows the user to enable or disable the PictBridge Port.
To change this setting:
1.
From the Configuration Menu, navigate to PictBridge Port .
2.
Select Enable or Disable .
3.
Touch to save the setting, or touch to return to the Configuration Menu without saving any
changes.
Service Menu
The Service Menu is used by the Technical Support Center to assist customers with common field issues.
To access the Service Menu:
1.
Bring the printer up to Manufacturing mode. See “Accessing the service menus” on page 3-5
2.
From the home screen touch > Service Menu.
Available options
Language See “Language” on page 3-8 .
SmartSolutions Reset
Reformat Solutions Partition See “Reformat Solutions Partition” on page 3-8 .
Reset Admin PIN See “Reset Admin PIN” on page 3-8 .
Wireless Homologation
Network SE Menu See “Network SE Menu” on page 3-8 .
Fax Tech Menu See “Fax Tech Menu” on page 3-9 .
Event Logs See “Event Logs” on page 3-9 .