Lexmark OptraImage 232, Setup Manual

Page: 13 / 157

OptraImage Setup Guide
11
Method 2: Print server TCP/IP setup utility
You can use this simple utility to initialize the IP address if
your computer is running Windows 95/98, Windows NT, or
Windows 2000.
It doesn’t matter which form of the UAA
you use (MSB or canonical). You need to know the 12-digit physical address (UAA) of the
print server to use this method. The UAA is listed on the
network setup page. See “Print a network setup page” on
page 10.
You can find information about installing,
using and troubleshooting the utility on
the Drivers, MarkVision, and Utilities CD. To install the utility:
1
Launch the Drivers, MarkVision and Utilities CD that
shipped with your OptraImage hardware.
2
Do a custom install to add network support.
3
In the list of installable components, select Print Server
TCP/IP Setup Utility.
4
Follow the instructions on your screen.