Inserting a memory card
Inserting a flash drive
Notes:
•
Insert the card with the brand name label facing
up.
•
Make sure any arrows on the card point toward
the printer.
•
If necessary, connect the memory card to the
adapter that came with it.
•
Make sure that the memory card inserted is
supported by the printer. For more information,
see “Supported memory cards and file types” on
page 15.
•
The card reader light comes on when a memory
card is inserted and blinks when a memory card is
being accessed.
FLA
SH
D
R I
VE
Notes:
•
The flash drive uses the same port that is used
for a PictBridge camera cable.
•
An adapter may be necessary if your flash
drive does not fit directly into the port.
Warning—Potential Damage:
Do not touch
any cables, ports, any network adapter, any
connector, the memory device, or the printer
in the areas shown while actively printing,
reading, or writing from the memory device.
A loss of data can occur.
Follow the instructions on the printer display or select from available options.
Notes:
•
If the printer does not recognize the memory device, then remove and reinsert it.
•
The printer reads only one memory device at a time.
About your printer
16
