Disk full [62]
Try one or more of the following:
•
From the control panel, touch
Continue
to clear the message and continue printing.
•
Touch
Reset active bin
to reset the active bin for a linked set of bins.
•
Delete fonts, macros, and other data stored in the printer hard disk.
•
Install a hard disk with larger capacity.
Disk full, scan job canceled
Try one or more of the following:
•
Touch
Continue
to clear the message and continue scanning.
•
Delete fonts, macros, and other data stored in the printer hard disk.
•
Install a hard disk with higher capacity.
Disk must be formatted for use in this device
From the printer control panel, touch
Format disk
to format the printer hard disk and clear the message.
Note:
Formatting deletes all the files stored in the printer hard disk.
Disk near full. Securely clearing disk space.
Try one or more of the following:
•
Touch
Continue
to clear the message and continue printing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a hard disk with higher capacity.
Empty the hole punch box
Try one or more of the following:
•
Empty the hole punch box.
•
Select
Continue
on the printer control panel to clear the message and continue printing.
•
Cancel the print job.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Troubleshooting
273
Summary of Contents for MX910 Series
