Lexmark MX910 Series, User Manual

Page: 145 / 363

Security Audit Log menu
Use To
Export Log Enable an authorized user to export the security log.
Notes:
•
To export the log from the printer control panel, attach a flash drive to the
printer.
•
To export the log from the Embedded Web Server, download the log to a
computer.
Delete Log
Yes
No
Specify whether audit logs are deleted.
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Server
[256 character string]
Remote Syslog Port
1–65535
Remote Syslog Method
Normal UDP
Stunnel
Remote Syslog Facility
0–23
Log full behavior
Wrap over oldest entries
E
‑
mail log then delete all
entries
Specify how audit logs are configured.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
• Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
•
Remote Syslog Server determines the value used to send logs to the remote
syslog server.
•
Remote Syslog Port identifies the port over which the printer transmits logged
events to a remote server.
• Remote Syslog Method identifies the protocol used by the printer to transmit
logged events to a remote server. Normal UDP is the factory default setting.
•
Remote Syslog Facility determines the Facility value that the printer uses when
sending events to the remote syslog server. 4 is the factory default setting.
•
“Log full behavior” determines how the printer resolves if the log entirely fills
its allotted memory. “Wrap over oldest entries” is the factory default setting.
Understanding the printer menus 145