Paper menu
Default Source menu
Use
To
Default Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder to appear as a menu setting.
•
If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. When one tray
is empty, the print job continues using the linked tray.
Paper Size/Type menu
Use
To
Tray [x] Size
A4
A5
A6
JIS
‑
B5
JIS
‑
B4
Letter
Legal
12 x 18
11 x 17
SRA3
A3
Executive
Oficio (Mexico)
Folio
Statement
Universal
Specify the paper size loaded in each tray.
Notes:
•
Letter is the U.S. factory default setting. A4 is the international factory
default setting.
•
If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. The
multipurpose feeder may also be linked. When one tray is empty, the
print job continues using the linked tray.
Note:
Only installed trays and feeders are listed in this menu.
Understanding the printer menus
118
Summary of Contents for MX910 Series
