Lexmark MX910 Series, User Manual

Page: 116 / 363

Page Setup
This option lets you change the following settings:
•
Sides (Duplex) —This specifies if the original document is printed on only one side or on both sides of the paper.
•
Orientation —This specifies the orientation of the original document, and then changes the Sides (Duplex) and
Binding settings to match the orientation.
•
Binding —This specifies if the original document is bound on the long
‑
edge or short
‑
edge side.
Scan Preview
This option lets you view the first page of the image before it is included in the file. When the first page is scanned, the
scanning is paused and a preview image appears.
Note: This option appears only when a formatted, working printer hard disk is installed.
Using the advanced options
Select from the following settings:
•
Advanced Imaging —This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality,
Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you
scan the document.
•
Custom Job —This combines multiple scanning jobs into a single job.
Note: This option appears only when a formatted, working printer hard disk is installed.
•
Edge Erase —This removes smudges or marks around the edges of a document. You can choose to remove an equal
area around all four sides of the paper, or pick a particular edge. Edge Erase erases whatever is within the area
selected, leaving nothing on that portion of the scan.
•
Transmission Log —This prints the transmission log or transmission error log.
Scanning 116