Lexmark MX-B557P User Manual Download Page 86

Page: 86 / 217

Login Restrictions

Menu item

Description

Login failures

1–10 (3*)

Specify the number of failed login attempts before the user gets locked out.

Failure time frame

1–60 minutes (5*)

Specify the time frame between failed login attempts before the user gets locked out.

Lockout time

1–60 minutes (5*)

Specify the lockout duration.

Web Login Timeout

1–120 minutes (10*)

Specify the delay for a remote login before the user is logged off automatically.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Conﬁdential Print Setup

Menu item

Description

Max Invalid PIN

2–10

Set the number of times an invalid PIN can be entered.

Notes:

•

A value of zero turns off this setting.

•

When the limit is reached, the print jobs for that user name and PIN are
deleted.

Conﬁdential Job Expiration

Off*

1 Hour

4 Hours

24 Hours

1 Week

Set the expiration time for conﬁdential print jobs.

Notes:

•

If this menu item is changed while conﬁdential print jobs reside in the printer
memory or hard disk, then the expiration time for those print jobs does not
change to the new default value.

•

If the printer is turned off, then all conﬁdential jobs held in the printer memory
are deleted.

Repeat Job Expiration

Off*

1 Hour

4 Hours

24 Hours

1 Week

Set the expiration time for a print job that you want to repeat.

Verify Job Expiration

Off*

1 Hour

4 Hours

24 Hours

1 Week

Set the expiration time that the printer prints a copy for the user to examine its quality,
before printing the remaining copies.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands