Lexmark MX-B557P User Manual Download Page 156

Page: 156 / 217

Action

Yes

Step 1

Pull out the tray.

Remove the paper, and then load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Squeeze and slide the paper guides to the correct position for
the size of the paper you are loading.

Insert the tray.

Print the document.

Is the print crooked or skewed?

Go to step 2.

The problem is
solved.

Step 2

Check if you are printing on a supported paper.

Print the document.

Is the print crooked or skewed?

Contact your

dealer

. The problem is

solved.

Solid black pages

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the toner cartridge is not supported, then install a

supported one.

Print the document.

Is the printer printing solid black pages?

Contact your

dealer

. The problem is

solved.

Troubleshooting

156

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands