Lexmark MX-B557P User Manual Download Page 151

Page: 151 / 217

Folded or wrinkled paper

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the paper folded or wrinkled?

Go to step 2.

The problem is
solved.

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the paper folded or wrinkled?

Go to step 3.

The problem is
solved.

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the paper folded or wrinkled?

Contact your

dealer

. The problem is

solved.

Troubleshooting

151

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands