Lexmark MB2236 User Manual Download

Page: 142 / 166

Poor copy quality

Action

Yes

Step 1

Using a damp, soft, lint-free cloth, wipe the scanner glass and
the ADF glass.

Make sure that the document or photo is loaded facedown on
the upper-left corner of the scanner glass.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Go to step 2.

Step 2

Check the quality of the original document or photo.

Adjust the scan quality settings.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Contact

customer

support

Vertical dark streaks on output when scanning from the ADF

ABCDE
ABCDE
ABCDE

Leading edge

Trailing edge

Action

Yes

Open the scanner cover.

Using a damp, soft, lint

‑

free cloth, wipe the ADF glass and the

ADF glass pad.

Close the scanner cover.

Scan the document.

Do vertical streaks appear on scanned documents?

Contact

customer

support

The problem is
solved.

Scanner does not close

Action

Yes

Remove obstructions that keep the scanner unit open.

Did the scanner unit close correctly?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

142

Summary of Contents for MB2236







































































































































































Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands

Lexmark MB2236, User Manual

Search results

Summary of Contents for MB2236

Reviews:

Related manuals for MB2236

Brands by name

Popular brands