16
Notices
Electronic Emission Notices
Federal Communications
Commission (FCC) Compliance
Information Statement
MarkNet print servers have been tested and
found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
The FCC Class A limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference, in which case the user will be
required to correct the interference at his own
expense.
The manufacturer is not responsible for any radio
or television interference caused by using other
than recommended cables or by unauthorized
changes or modifications to this equipment.
Unauthorized changes or modifications could
void the user's authority to operate this
equipment.
Note:
To assure compliance with FCC
regulations on electromagnetic interference for a
Class A computing device, use a properly
shielded and grounded cable such as Lexmark
part number 1329605. Use of a substitute cable not
properly shielded and grounded may result in a
violation of FCC regulations.
Industry Canada Compliance
Statement
This Class A digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis de conformité aux normes
d’Industrie Canada
Cet appareil numérique de la classe A respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
European Community (EC)
Directives Conformity
This product is in conformity with the protection
requirements of EC Council directives 89/336/
EEC and 73/23/EEC on the approximation and
harmonization of the laws of the Member States
relating to electromagnetic compatibility and
safety of electrical equipment designed for use
within certain voltage limits.
A declaration of conformity with the
requirements of the Directive has been signed by
the Director of Manufacturing and Technical
Support, Lexmark International, S.A., Boigny,
France.
This product satisfies the Class A limits of EN
55022 and safety requirements of EN 60950.
CISPR 22
WARNING:
This is a Class A product. In a
domestic environment, this product may cause
radio interference, in which case the user may be
required to take adequate measures.
AVERTISSEMENT:
Ce produit appartient à la
classe A. Dans un environnement résidentiel, ce
produit risque de provoquer des interférences
radio, auquel cas l'utilisateur devra prendre les
mesures adéquates.
Summary of Contents for MarkNet Pro
Page 20: ...20...
