Lexmark M3250 User Manual Download

Page: 117 / 187

Action

Yes

Step 6

Check if the web proxy servers are disabled.

Are the web proxy servers disabled?

Go to step 7.

Contact your
administrator.

Step 7

Access the Embedded Web Server.

Did the Embedded Web Server open?

The problem is
solved.

Contact

customer

support

Unable to read ﬂash drive

Action

Yes

Step 1

Check if the printer is not busy processing another print, copy,
scan, or fax job.

Is the printer ready?

Go to step 2.

Wait for the printer to
ﬁnish processing the
other job.

Step 2

Check if the ﬂash drive is inserted into the front USB port.

Note:

The ﬂash drive does not work when it is inserted into the

rear USB port.

Is the ﬂash drive inserted into the correct port?

Go to step 3.

Insert the ﬂash drive
into the correct port.

Step 3

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 33

Is the ﬂash drive supported?

Go to step 4.

Insert a supported
ﬂash drive.

Step 4

Check if the USB port is enabled. For more information, see

“Enabling the USB port” on page 117

Remove, and then insert the ﬂash drive.

Does the printer recognize the ﬂash drive?

The problem is
solved.

Contact

customer

support

Enabling the USB port

From the home screen, touch

Settings

Network/Ports

USB

Enable USB Port

Troubleshooting

117

Summary of Contents for M3250




























































































































































































Search results

Summary of Contents for M3250

Reviews:

Related manuals for M3250

Brands by name

Popular brands

Lexmark M3250, User Manual

Search results

Summary of Contents for M3250

Reviews:

Related manuals for M3250

Brands by name

Popular brands