Lexmark M124x Service Manual Download Page 127

Page: 127 / 318

Action

Yes

Step 3

Remove the optional tray.

Under the printer, check the interconnect cable for damage.

Is the cable free of damage?

Go to step 5.

Go to step 4.

Step 4

Replace the interconnect cable. See

“Interconnect cable

removal” on page 188

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Reinstall or replace the optional tray.

Note:

Make sure that the interconnect cable properly ﬁts with the

socket on the optional tray.

Does the problem remain?

Go to step 6.

The problem is
solved.

Step 6

Remove the tray insert from the source tray, and then check it for
damage.

Is the tray insert from the source tray free of damage?

Contact the next
level of support.

Go to step 7.

Step 7

Replace the tray insert.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

171 errors

171 error messages

Error code Description

Action

171.82

Cooling fan error.

See

“Cooling fan failure service check” on

page 128

171.83

Cooling fan error.

171.84

Cooling fan error.

171.85

Cooling fan error.

4600-830, -835, -895

Diagnostics and troubleshooting

127

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands