Lexmark CX820 Series User Manual Download Page 181

Page: 181 / 199

Close door C.

CAUTION—PINCH HAZARD:

To avoid the risk of a pinch injury, keep hands clear of the labeled area

when closing door C.

Turn on the printer.

Installing the multiposition staple, hole punch ﬁnisher

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, see

www.lexmark.com/multifunctionprinters

From the control panel, press and hold the power button for 5 seconds to turn off the printer.

Unplug the power cord from the electrical outlet, and then from the printer.

Lock the caster base wheels to keep the printer from moving.

Upgrading and migrating

181

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands