Lexmark CX820 Series User Manual Download

Page: 163 / 199

Partial copies of document or photo

Action

Yes

Step 1

Make sure that the document or photo is loaded facedown on
the upper left corner of the scanner glass.

Copy the document or photo.

Is the document or photo copied correctly?

The problem is
solved.

Go to step 2.

Step 2

Match the paper size setting and the paper loaded in the tray.

Copy the document or photo.

Is the document or photo copied correctly?

The problem is
solved.

Contact

customer

support

Poor copy quality

Action

Yes

Step 1

Clean the scanner glass and the ADF glass with a damp, soft,
lint

‑

free cloth.

Make sure that the document or photo is loaded facedown on
the upper left corner of the scanner glass.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Go to step 2.

Step 2

Check the quality of the original document or photo.

Adjust the scan quality settings.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Contact

customer

support

Scan job was not successful

Action

Yes

Step 1

Check the cable connections.

Make sure that the Ethernet or USB cable is securely connected
to the computer and the printer.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Go to step 2.

Troubleshooting

163

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands