Lexmark CX820 Series User Manual Download

Page: 156 / 199

Action

Yes

Step 8

Turn off the printer, wait for about 10 seconds, and then turn it back
on.

Is the printer responding?

The problem is
solved.

Contact

customer

support

Job prints from the wrong tray or on the wrong paper

Action

Yes

Step 1

Check if you are printing on a supported paper.

Print the document.

Is the document printed from the correct tray or on the correct
paper?

The problem is
solved.

Go to step 2.

Step 2

Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Print the document.

Is the document printed from the correct tray or on the correct
paper?

The problem is
solved.

Go to step 3.

Step 3

Check if the trays are not linked.

Print the document.

Is the document printed from the correct tray or on the correct
paper?

The problem is
solved.

Contact

customer

support

Color quality problems

Adjusting toner darkness

From the home screen, touch

Settings

Print

Quality

Adjust the toner darkness.

Apply the changes.

Troubleshooting

156

Summary of Contents for CX820 Series








































































































































































































Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands

Lexmark CX820 Series, User Manual

Search results

Summary of Contents for CX820 Series

Reviews:

Related manuals for CX820 Series

Brands by name

Popular brands