Lexmark CX331 User Manual Download Page 163

Page: 163 / 204

Action

Yes

Step 1

Adjust the paper guides in the tray to the correct position for
the paper loaded.

Print the document.

Is the print crooked or skewed?

Go to step 2.

The problem is
solved.

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the print crooked or skewed?

Go to step 3.

The problem is
solved.

Step 3

Check if the paper loaded is supported.

Note:

If paper is not supported, then load a supported paper.

Print the document.

Is the print crooked or skewed?

Contact

customer

support

The problem is
solved.

Solid color or black images

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Troubleshoot a problem

163

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands