Lexmark CX331 User Manual Download Page 156

Page: 156 / 204

Action

Yes

Step 3

Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.

Note:

Make sure that the setting matches the paper loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Contact

customer

support

Light print

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Perform Color Adjust.

From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color Adjust

Print the document.

Is the print light?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, increase toner darkness
from the Printing Preferences or Print dialog.

Note:

You can also change the setting on the printer control

panel. Navigate to

Settings

Print

Quality

Toner

Darkness

Print the document.

Is the print light?

Go to step 3.

The problem is
solved.

Troubleshoot a problem

156

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands