Lexmark CX331 User Manual Download Page 155

Page: 155 / 204

Action

Yes

Step 2

Open the front door, and then ﬁrmly push it down.

Pull out the print cartridge tray.

Remove, and then insert the print cartridges.

Insert the print cartridge tray, and then close the door.

Print the document.

Does gray or colored background appear on prints?

Contact

customer

support

The problem is
solved.

Incorrect margins

Action

Yes

Step 1

Adjust the paper guides to the correct position for the paper
loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 2.

Step 2

Set the paper size from the control panel. Navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 3.

Troubleshoot a problem

155

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands