Lexmark CX331 User Manual Download Page 151

Page: 151 / 204

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Open the front door, and then ﬁrmly push it down.

Pull out the print cartridge tray.

Remove, and then insert the print cartridges.

Insert the print cartridge tray, and then close the door.

Print the document.

Is the printer printing blank or white pages?

Contact

customer

support

The problem is
solved.

Dark print

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Perform Color Adjust.

From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color Adjust

Print the document.

Is the print too dark?

Go to step 2.

The problem is
solved.

Troubleshoot a problem

151

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands