Lexmark CX331 User Manual Download Page 147

Page: 147 / 204

Conﬁdential and other held documents do not print

Action

Yes

Step 1

From the control panel, check if the documents appear in the
Held Jobs list.

Note:

If the documents are not listed, then print the

documents using the Print and Hold options.

Print the documents.

Are the documents printed?

The problem is
solved.

Go to step 2.

Step 2

The print job may contain a formatting error or invalid data. Delete
the print job, and then send it again.

Are the documents printed?

The problem is
solved.

Go to step 3.

Step 3

Delete some held jobs to free up printer memory.

Resend the print job.

Are the documents printed?

The problem is
solved.

Contact

customer

support

Slow printing

Action

Yes

Step 1

Make sure that the printer cable is securely connected to the
printer and to the computer, print server, option, or other network
device.

Is the printer printing slow?

Go to step 2.

The problem is
solved.

Step 2

Make sure that the printer is not in Eco

‑

Mode or Quiet Mode.

•

From the home screen, touch

Settings

Device

Power

Management

Eco

‑

Mode

•

From the home screen, touch

Settings

Device

Maintenance

Conﬁguration Menu

Device Operations

Quiet Mode

Print the document.

Is the printer printing slow?

Go to step 3.

The problem is
solved.

Troubleshoot a problem

147

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands