Lexmark CX331 User Manual Download Page 130

Page: 130 / 204

Hibernate mode

From the home screen, touch

Settings

Device

Power Management

Timeouts

Hibernate Timeout

Select the amount of time that the printer stays idle before it enters Hibernate mode.

Notes:

•

For Hibernate Timeout to work, set Hibernate Timeout on Connection to Hibernate.

•

The Embedded Web Server is disabled when the printer is in Hibernate mode.

Adjusting the brightness of the printer display

From the home screen, touch

Settings

Device

Preferences

Screen Brightness

Adjust the setting.

Conserving supplies

•

Print on both sides of the paper.

Note:

Two-sided printing is the default setting in the print driver.

•

Print multiple pages on a single sheet of paper.

•

Use the preview feature to see how the document looks like before printing it.

•

Print one copy of the document to check its content and format for accuracy.

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 20 kg (44 lb), then it may require

two or more people to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

Maintain the printer

130

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands