Lexmark CS943 User Manual Download Page 221

Page: 221 / 400

Maintain the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Checking the status of parts and supplies

From the home screen, touch

Status/Supplies

Select the parts or supplies that you want to check.

Note:

You can also access this setting by touching the top section of the home screen.

Conﬁguring supply notiﬁcations

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Notiﬁcations

From the Supplies menu, click

Custom Supply Notiﬁcations

Select a notiﬁcation for each supply item.

Apply the changes.

Setting up e

‑

mail alerts

Conﬁgure the printer to send e

‑

mail alerts when supplies are low, when paper must be changed or added, or

when there is a paper jam.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Notiﬁcations

‑

mail Alert Setup

, and then conﬁgure the settings.

Note:

For more information on SMTP settings, contact your e

‑

mail provider.

Apply the changes.

Click

Setup E-mail Lists and Alerts

, and then conﬁgure the settings.

Apply the changes.

Maintain the printer

221

Summary of Contents for CS943

















































































































































































































































































































































































































Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands

Lexmark CS943, User Manual

Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands