Lexmark C6160 User Manual Download Page 97

Page: 97 / 142

Action

Yes

Step 3

Check if the ports are working and if the cables are securely
connected to the computer and the printer.

For more information, see the setup documentation that came
with the printer.

Resend the print job.

Is the document printed?

The problem is
solved.

Go to step 4.

Step 4

Turn off the printer, wait for about 10 seconds, and then turn it
back on.

Resend the print job.

Is the document printed?

The problem is
solved.

Go to step 5.

Step 5

Remove, and then reinstall the printer software.

Note:

The printer software is available at

http://support.lexmark.com

Resend the print job.

Is the document printed?

The problem is
solved.

Contact

customer

support

Print quality is poor

Blank or white pages

Note:

Before solving the problem, print the quality sample pages to determine the missing color. From the

home screen, touch

Settings

Troubleshooting

Basic Print Quality Pages

Troubleshooting

Summary of Contents for C6160















































































































































Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands

Lexmark C6160, User Manual

Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands