Lexmark C6160 User Manual Download Page 87

Page: 87 / 142

Internal solutions port does not operate correctly

Action

Yes

Step 1

Print a menu settings page, and then check if the internal solutions
port (ISP) appears in the Installed Features list.

Is the ISP listed in the Installed Features list?

Go to step 3.

Go to step 2.

Step 2

Remove, and then install the ISP. For more information, see

“Installing an internal solutions port” on page 121

Note:

Use a supported ISP.

Does the ISP operate correctly?

The problem is
solved.

Go to step 3.

Step 3

Check the cable and the ISP connection.

Use the correct cable, and then make sure that it is securely
connected to the ISP.

Check if the ISP solution interface cable is securely connected
into the receptacle of the controller board.

Does the ISP operate correctly?

The problem is
solved.

Contact

customer

support

Parallel or serial interface card does not operate correctly

Action

Yes

Step 1

Print a menu settings page, and then check if the parallel or serial
interface card appears in the Installed Features list.

Is the parallel or serial interface card listed in the Installed Features
list?

Go to step 3.

Go to step 2.

Step 2

Remove, and then install the parallel or serial interface card.

For more information, see

“Installing an internal solutions port” on

page 121

Does the parallel or serial interface card operate correctly?

The problem is
solved.

Go to step 3.

Step 3

Check the connection between the cable and the parallel or serial
interface card.

Does the parallel or serial interface card operate correctly?

The problem is
solved.

Contact

customer

support

Troubleshooting

Summary of Contents for C6160















































































































































Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands

Lexmark C6160, User Manual

Search results

Summary of Contents for C6160

Reviews:

Related manuals for C6160

Brands by name

Popular brands