Lexmark 7003-050 X340n, Service Manual

Page: 62 / 162

Diagnostic aids
3-3
7003-XXX
Note: To exit diagnostics mode, press the STOP button or the back button.
Serial number
This menu item is used to set the serial number for the MFP.
To set the serial number:
1.
Use Up or Down to scroll to Serial Number.
2.
Press to select Serial Number.
3.
Enter a value in the highlighted digit using the numeric keypad. The cursor advances to the right when a
digit is entered.
To enter a specific digit, use Up to move the cursor to the left or Down to move the cursor to the right.
USB
Use the USB menu item to set the USB speed.
To set the USB speed:
1.
Use Up or Down to scroll to USB.
2.
Press to select USB.
3.
Toggle between the High Speed and Full Speed settings using Up or Down.
4.
When the desired setting is displayed, press . The MFP will automatically reboot.
SCANNER CALIBRATION - Go to “” on page 3-8 .
Restore Default
ATM MENU - Go to “ATM menu” on page 3-9 . Do not change these settings.
FAX SETTINGS - Go to “Fax settings” on page 3-9 .
Fax Modulations
Detect EOLs
Autoprint T30 Log
Print T30 Log
Print CND Log
Print Stack Info
Station ID
Faxtrace Mask
Print User Settings
Right Margin
HOMOLOGATION SETTINGS - Go to “Homologation settings” on page 3-11 . Do not change
these settings.
UTILITIES - Go to “Utilities” on page 3-11 .
Reset System: Menu Defaults
Reset System: Fax NVRAM
Reset System: CLR Phonebook
Reset System: Erase EFS
manuals4u.com manuals4u.com