Lexmark 7003-050 X340n, Service Manual

Page: 70 / 162

Diagnostic aids
3-11
7003-XXX
Homologation settings
Note: These settings should only be adjusted at the discretion of your second level support. Use the Print All
item in the Homologation Settings menu to get a print out of the settings before calling your second level
support center.
Utilities
The Utilities menu item resets the Menu defaults, Fax NVRAM, the phonebook, and the flash file system. Menu
defaults.
Menu Defaults is the first item to appear when the Utilities menu item is selected. To clear the menu defaults,
do the following.
1.
Press to select Menu Defaults.
2.
Press again.
Resetting...
is displayed.
The MFP reboots.
Warning: All customer settings will be used when Menu Defaults is used.
Fax NVRAM
Fax NVRAM resets the NVRAM to its default settings.
Note: When this menu setting is used, the device is configured for use in the United States.
Perform the following steps to reset the FAX NVRAM.
1.
In the Utilities menu, use the Up and Down to scroll to FAXNVRAM.
2.
Press to select FAXNVRAM.
3.
Press .
•
Resetting...
displays.
•
MFP returns to Ready mode.
Clr Phonebook
Clr Phonebook erases all the FAX phonebook entries.
Perform the follow steps to clear the phonebook entries:
1.
Press to select Clr Phonebook.
2.
Press again. Clearing... displays.
The MFP returns to Ready mode.
ERASE FFS
ERASE FFS deletes all data in the flash file system. The flash file system is used to hold data that is queued up
for transmission, or printing.
The following steps are performed to clear the flash file system:
1.
Press to select ERASE EFS.
2.
Press again. Completed... is displayed.
•
ERASE SECTOR is diplayed. The MFP erases the flash memory.
•
Partition Disk is displayed.
•
Writing MBR is displayed.
•
Format Disk is displayed. The flash memory is reformatted.
•
The MFP reboots. at the end of the self test, Reformatted is displayed.
manuals4u.com manuals4u.com