Lexmark 4227-100, Service Manual

Page: 2 / 134

Second Edition (May, 1997)
The Following Paragraph Does Not Apply To The United Kingdom Or Any
Country Where Such Provisions Are Inconsistent With Local Law: LEXMARK
INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer
of express or implied warranties in certain transactions, therefore, this statement
may not apply to you.
This publication could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in later editions of the publication. Improvements or changes in the
products or the programs described in this publication may be made at any time.
Publications are not stocked at the address given below; requests for publications
should be made to your point of purchase.
Comments may be addressed to Lexmark International, Inc., Department D22A/
035-3, 740 New Circle Road NW, Lexington, Kentucky 40550, U.S.A. Lexmark
may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Lexmark is a trademark of Lexmark International, Inc., registered in the United
States and/or other countries.
Other trademarks are the property of their respective owners.
©
Copyright Lexmark International, Inc. 1996, 1997
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth
in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark
International, Inc., Lexington, KY 40550.
4227-100