Diagnostic Information 2-13
Irrecoverable Operator Errors
Alt and Paper Out lights blink to indicate an operator error. If this
indication cannot be recovered, the problem may be the paper
empty sensor or the paper select sensor. Check the following in the
order listed and if the printer does not work correctly, go to the
indicated service check.
Paper Empty Sensor
Paper Select Sensor
Action
Check
Remove all paper
from the printer.
Turn the power on.
Paper Out blinks when paper does not exist.
Paper Out turns off when paper exists.
Go to the
“Paper Empty Sensor Service Check” on
page 2-26
.
Action
Check
Turn the power off.
Install the Push
Tractor.
Set the paper select
lever to the tractor
position and load the
continuous forms.
Turn the power on.
Alt + Park/Load function correctly.
Go to the
“Paper Select Sensor Service Check” on
page 2-30
.
Remove the
continuous forms.
Set the paper select
lever to the cut sheet
position and insert a
cut sheet.
When Auto Loading is enabled, paper feeds
automatically.
When Auto Loading is disabled, press Form Feed
to load a cut sheet. Check that Alt + Park/Load
does not function.
Go to the
“Paper Select Sensor Service Check” on
page 2-30
.
Summary of Contents for 2380-001
