background image

 

Supplies information

107

Lexmark Return Program

The Lexmark Return Program is an environmental program in which Lexmark sells new toner 
cartridges at a special price with the agreement that you will return them, at no cost, only to Lexmark 
for recycling.

Regular toner cartridges without this agreement are also available.

Note: Regular toner cartridges can also be returned, at no cost, to Lexmark using the 

Lexmark Cartridge Collection Program. To learn how to return a cartridge at no cost 
in your country, visit Lexmark’s Web site at www.lexmark.com/recycle.

Refilled toner cartridge notice

Lexmark Return Program toner cartridges cannot be refilled. Lexmark does not recommend the use 
of third-party remanufactured cartridges. Lexmark cannot assure the excellent print quality and 
reliability of its toner cartridges after a toner cartridge has been refilled. A substantial reduction in 
photoconductor kit life is also likely if refilled toner cartridges are used.

Warning:

Toner cartridge leaks due to refilling can cause failure in several areas of your 
printer. Printer failures caused by third-party remanufactured toner cartridges are 
not covered by your Lexmark printer warranty, extended warranty, or service 
agreement.

Recycling Lexmark products

To return your Lexmark products to Lexmark for recycling:

1

Visit our Web site:

www.lexmark.com/recycle

2

Follow the instructions on your screen.

Summary of Contents for 22S0502 - E234 Monochrome Laser Printer




























































































































Reviews: