PJL
3-18
POWERSAVETIME
(DEFAULT only)
Power Save time,
in minutes
0 to 120 (Model specific)
0 to 240 (Model specific)
(0 indicates the Power Saver Time feature is disabled.)
The time the printer remains idle before it enters
Power Save mode when POWERSAVE is On.
Note: If a value greater than 120 or 240 is specified by
a SET or DEFAULT command, the value is changed to
120 or 240 based on the printer model.
20
QTY
(SET only)
Collation -
Collated Copies
(QTY)
0 to 999
Used to request the number of collated copies of a
print job.
If Collation - Collated Copies (QTY) is not equal to 0, a
DINQUIRE or INQUIRE returns the numerical setting
for QTY. If Collation - Collated Copies (QTY) is set to
Off, a DINQUIRE or INQUIRE returns 0.
Note: If a value greater than 999 is specified by a SET
or DEFAULT command, the value is changed to 999.
0
REPRINT
Jam Recovery
ON, OFF, AUTO
AUTO
RESOLUTION
Print Resolution
300, 600, 1200
600
RESOURCESAVE
(DEFAULT only)
Resource Save
ON, OFF, AUTO
ON indicates Resource Save is set On.
OFF and AUTO indicate Resource Save is set to Off.
See “Table B-1: Common Variables for Both Printer
Languages” on page B-1 for the default value of your
printer.
OFF, AUTO
(Model specific)
RET
Print Quality
Enhancement
Technology
(PQET)
OFF, DARK, MEDIUM, LIGHT, ON
If this value is set through PJL, the same value is
returned on a PJL inquiry.
DARK, MEDIUM, LIGHT, and ON values indicate that
PQET is On. OFF indicates PQET is Off.
ON
TIMEOUT
Print timeout,
in seconds
0 to 255
The time the printer remains idle before the job is
forced to print.
Note: If a value greater than 255 is specified by a SET
or DEFAULT command, the value is changed to 255.
90
Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable
Function
Selections
Factory Default
