background image

Appendix

57

Printing beyond the basics

Maintaining your printer

Troubleshooting

Appendix

Index

Steps to basic printing

This section contains information 
about:

Installing printer software

Uninstalling printer software

Power supply

Safety

Installing printer 
software

You can obtain the printer software 
using the:

Compact disc (CD) that came 
with your printer 

World Wide Web

If your printer software does not 
install properly, a communications 
error message appears when you 
try to print. You may need to 
uninstall and then reinstall the 
printer software. For help, see 

page 58

.

Using the CD

Start Mac OS.

When the desktop appears, 

insert the software CD.
The Lexmark Z12 software 
installation screen appears.

Click Install and Agree.

Click Install.

Select the Lexmark Z12 printer 

in the Chooser by following the 
steps on the dialog box.

Note: If your Macintosh computer 
locks up while printing, you may 
need to turn off the printer and the 
computer, and then turn them back 
on. When you turn them back on, 
the printer driver’s spooler may 
attempt to start printing the job that 
was in the queue before the 
computer locked up. This could 
cause your system to lock up 
again.

To recover from this problem:

Turn off the printer and the 

computer.

Hold down the Shift key and turn 

the computer on.

Continue to hold the Shift key 

until you see the Mac OS 
screen and the words 
Extensions Off.

Release the Shift key.

Locate the Lexmark Z12 printer 

icon on your desktop. The 
inactive printer spooler has an X 
over it.

Double-click the icon to open 

the Lexmark Z12 dialog box.

Drag your print jobs to the trash 

can.

Restart the computer to enable 

the extensions.

Summary of Contents for 17E0285 - Z12 Inkjet Printer































































Reviews: