Rev. 9-2011
on the bottom of the screen will turn blue & green.
30.
After verifiying signal reception, press the EXIT
button once.
31.
Press the CH
▼
button until you highlight “Auto Scan”.
32.
Press OK on Auto Scan to enter the Auto Scan screen.
33.
Make sure you have the following settings on this
screen:
1. Satellite = Galaxy 19 Ku 97W
2. Scan Mode = ALL
3. Channel = TV+Radio
34.
Press the CH
▼
button until you highlight “Search”.
35.
Press the OK button to start the search function.
At this point, the receiver is performing a blind scan. It will
search the satellite for all the up to date frequencies and channel
list. Your existing channel list will not change unless there are
new channels found on the satellite.
36.
Once the receiver is finishes searching and a report is
displayed, press OK to save the newly scanned frequencies and
channel list. Please note, the receiver may not always give
you report. If the receiver does not give you a report and
automatically returns to the Auto Scan screen, please do not
worry. The receiver has automatically saved the new channel
and frequency list.
37.
Coninuously press EXIT until you have fully exited from
all menus.
At this point, your satellite system is fully installed. Sit back,
relax, and enjoy the incredible world of Free To Air (FTA)
satellite television.
If you feel that you are not able to properly and according to
local codes install a satellite system, please hire a local
installer by visiting
www.MyLocalInstaller.com
.
If you need to purchase a self installation kit, satellite finders,
or any other accessories, use the Discount Coupon code “manual” to
save
10%
on any of your purchase made through
www.galaxy-
marketing.com
. This discount is only valid on orders placed online
through
www.Galaxy-Marketing.com
.
This manual is intended as a general guideline and is to be used by a licensed professional technician. All
satellite systems must be installed by a licensed professional technician or installer. If you decide not
to use this advise and harm any property or persons by using this manual, WS International is in no way
responsible for any damages caused by the use or misuse of this guideline.
