Lexicon RV-8, Brochure & Specs

Page: 5 / 6

Audio Inputs and Outputs
Analog Audio Inputs Eight stereo (RCA) or five stereo and one 5.1-channel or two
stereo and two 5.1-channel connectors
Digital Audio Inputs Four S/PDIF coaxial (RCA) and four S/PDIF optical (TosLink)
connectors; coaxial and optical input connectors conform to
IEC-958, S/PDIF standards
Sample Rates: 44.1, 48, 88.2, 96kHz
Accepts: 16-24 bits PCM audio, Dolby Digital, DTS, DTS-ES and DTS-
96k discrete data formats
Main Audio Outputs Eight Unbalanced (RCA) connectors for Front L/R, Center, Sub,
Side L/R and Rear L/R
Zone 2 Audio Outputs One Unbalanced (RCA, variable output level) stereo connector,
One Unbalanced (RCA, fixed output level) stereo connector,
One S/PDIF coaxial (RCA) connector and one optical (Toslink) con-
nector
Zone 3 Audio Outputs One Stereo (RCA, variable output level) connector
Headphone One Stereo (1/4-inch phone) connector
Amplifier Seven Channels, two channels assignable to Zone 2 or Zone 3
Performance (Main Zone)
Analog-to-Digital Conversion 24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
Digital-to-Analog Conversion 24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
Frequency Response* 20Hz to 20kHz, +0.1dB/-0.2dB, -0.5dB at 10Hz,
-0.5dB at 40kHz, reference 1kHz
THD + Noise* Below 0.02%, 20Hz to 20kHz, 140Wrms all channels driven
Dynamic Range* 105dB minimum, 22kHz bandwidth, “A” weighted
102dB minimum, 22kHz bandwidth, unweighted
Signal-to-Noise Ratio* 105dB minimum, 22kHz bandwidth, “A” weighted
102dB minimum, 22kHz bandwidth, unweighted
Input Sensitivity 200mVrms (2Vrms for maximum output level) at 0dB input gain
Input Impedance 100k
Ω
in parallel with 150pF
Preamp Output Level 150mVrms typical, 3.5Vrms maximum (RCA connectors)
Maximum value with full-scale input signal and volume at +12dB
Preamp Output Impedance 500
Ω
in parallel with 150pF (RCA connectors)
Performance (Zone 2 and Zone 3)
Analog-to-Digital Conversion 24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture (Zone 2 only)
Digital-to-Analog Conversion 24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
Frequency Response 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz
THD + Noise Below 0.005% at 1kHz, (1Vrms output level)
Dynamic Range 102dB minimum, 22kHz bandwidth
Signal-to-Noise Ratio 102dB minimum, 22kHz bandwidth
Input Sensitivity 200mVrms (4Vrms for maximum output level)
Input Impedance 100k
Ω
in parallel with 150pF
Preamp Output Level 200mVrms typical, 4Vrms maximum; maximum value with
full-scale input signal and volume at 0dB
Preamp Output Impedance 300
Ω
in parallel with 150pF
Video Inputs and Outputs
Video Inputs Composite (RCA), five S-video and three component video (RCA)
Video Outputs Five Composite (RCA), (two monitor, two Zone2, one Zone3),
Four S-video (two monitor, two Zone2) and one component (RCA)
Performance (Composite & S-video)
Compatibility NTSC, PAL and SECAM
Switching Active
Output Level 1.0V peak-to-peak
Impedance 75
Ω
Input Return Loss >40dB
Differential Gain <0.5%
Differential Phase <0.5°
Bandwidth >25MHz
K Factor <0.3%
Gain ±0.15dB
Signal-to-Noise Ratio >65dB
Frequency Response 10Hz to 10MHz + 0.1/-0.3dB
Performance (Component Video)
Compatibility 3-Channel (Y/Pb/Pr), format-independent
Switching Passive
Impedance 75
Ω
Bandwidth >150MHz
Insertion Loss <3dB
Video Converter NTSC, PAL, SECAM to Y/Pb/Pr
S
p
e
c
i
f
i
c
a
t
i
o
n
s
RV-8
Specifications