Lexicon PCM92, Owner'S Manual

Page: 17 / 64

11
When a Machine Preset is loaded, the selected machine is highlighted in the
Configuration icon, and three of the loaded preset’s parameters appear at the
bottom of the Display.
0:Med Hall
1:PreDelay :14ms
2:MidRT :1.59s
3:RvbOutFreq :4750.0Hz
0:Med Hall
1:PreDelay :14ms
2:ReverbTime :1.59s
3:RvbOutFreq :4750.0Hz
48
Configuration Icon
(Machine Preset)
Press the Machine button repeatedly to cycle through the virtual machines in
a System Preset, and eventually back to the System Preset.
edItING A PReSet
To edit a System Preset, you must edit the virtual machines within it. Press
the Machine button to cycle through the virtual machines within a System
Preset.
Each virtual machine contains a set of parameters that you can edit and
adjust. When a virtual machine is selected, three of its parameters appear at
the bottom of the Display. Adjust the first parameter with Knob A, the sec-
ond parameter with Knob B, and the third parameter with Knob C. To see
the next set of parameters you can adjust, press Knob A.
0:Med Hall
1:PreDelay :14ms
2:MidRT :1.59s
3:RvbOutFreq :4750.0Hz
48
Soft Row Parameters
Each virtual machine has 8 parameters you can adjust this way. All presets
have more than 8 parameters, but only 8 can be edited via the A, B, and C
knobs in this fashion. You can choose which parameters are in the list by
using the Soft Row Setup menu located in the Machine menu (see page 21
for more information).