Lexicon PCM NATIVE DUAL DELAY, Owner'S Manual

Page: 33 / 36

25
Delay Feedback Master
Controls all delays in the algorithm. Each voice has its nominal feedback gain adjusted by this
percentage.
Voice Parameters
Delay Time
Delay time defines the time offset of a delay voice. This parameter can be adjusted in one of
two ways, they are:
• Absolute: Adjusts the delay time in seconds/milliseconds.
• Tempo:
Adjusts the delay time in fractions of tempo (quarter note, eighth note, etc.). This
tempo is synced to the DAW’s session tempo.
Delay Level
This parameter adjusts the output level of the delay line within each voice.
Feedback Level
This parameter determines the feedback level for a particular voice. It is controlled
independently of the voice’s output level.
Output Pan
Routes the post-filter delay voice across the left-right soundstage.
Feedback Pan
This parameter controls the left-right soundstage of the feedback portion of the delay line
signal.
Output Filter Type
This parameter allows you to assign a filter on the output of a delay voice. There are 6
selections available, they are: 1 Pole Lopass, 1 Pole Hipass, 2 Pole Lopass, 2 Pole Hipass,
Bandpass, and Notch.
Output Frequency
This parameter lets you set the cutoff frequency of the output filter. The audible effect of this is
determined by the Output Filter Type parameter.
Content Checked