Lexicon PCM 90 User Manual Download Page 89

Page: 89 / 129

4-5

The Presets

P0 Halls cont'd.

Instrument

3.0 Horns Hall

ADJUST:

Timbre

Keywords: Cncrt Hall, Instrument, Natural, Acoustic

A very large space, ideal for horns. ADJUST optimizes the timbre of the horn for a bright,
or warm sound.

3.1 Snare Gate

ADJUST:

Release & Threshold

Keywords: Cncrt Hall, Instrument, Gated, Drums/Perc

A very tight, gated hall reverb. Roomy and dense when open but slams shut abruptly.
Perfect for snare drums and other percussive instruments.

3.2 Guitar Cave

ADJUST:

Decay

Keywords: Instrument, RandomHall, Guitar, Dark

Long predelay with recirculating echoes. The main delay taps give it a lot of left and right
bouncing activity. Great solo preset.

3.3 Drum Cave

ADJUST:

Decay

Keywords: Drums/Perc, Small, RandomHall, Instrument

A medium sized cave with short decay time. Use ADJUST to vary reverb decay time to
suit the tempo of the music.

3.4 Saxy Hangar

ADJUST:

Out Width

Keywords: Ambience, Instrument, Long, Acoustic

A large hall that sounds like an airplane hangar designed for a spacious sax solo.

3.5 Gated Hall

ADJUST:

Room Size

Keywords: Instrument, Large, RandomHall, Gated

If it were possible to have a gated hall, it would sound like this.

3.6 For The Toms

ADJUST:

Room Type

Keywords: Ambience, Instrument, Short, Drums/Perc

A large, dense room reverb for toms and other percussives.

3.7 Synth Hall

ADJUST:

Decay

Keywords: Cncrt Hall, Instrument, Keyboard, Long

A chorused hall with long decay time for all synth type pads and washes. Also good on
strings. Pitched sound sources may seem to sway from center pitch. This can be made
more or less dramatic dependent upon the chorus value.

3.8 ShortReverse

ADJUST:

Shape

Keywords: Cncrt Hall, Instrument, Special FX, Unnatural

A short reverse reverb with a quick build up and short decay. Good for leads and
percussives.

3.9 GtrBalladBPM

ADJUST:

High Cut

Keywords: Instrument, RandomHall, Tempo, Ballad

This medium-sized room blends a 2-second reverb decay with delay taps that beat
according to the tempo you Tap in.

Summary of Contents for PCM 90


































































































































Search results

Summary of Contents for PCM 90

Reviews:

Related manuals for PCM 90

Brands by name

Popular brands

Lexicon PCM 90, User Manual

Search results

Summary of Contents for PCM 90

Reviews:

Related manuals for PCM 90

Brands by name

Popular brands