Lexicon MPX 5 V1.1 - REV, Installation Instructions Manual, Page: 7 / 16

STEP 1 - OPEN THE UNIT
1. Using a size 1 Phillips head screwdriver, remove the
screws (Lexicon Part No. 640-02812) on the top and
bottom of the unit (three on top, three on bottom).
Installation Instructions & Release Notes
MPX 500 Version 1.1 Software
7
Top View of Unit
Front
Back
2. Carefully remove the side panels by pulling them out
(as shown in the illustration below). Begin pulling at
the end closest to the front panel.
3. Remove the screw (Lexicon Part No. 640-02812)
and nut (Lexicon Part No. 643-01732) closest to the
AC receptacle. This is the only screw with a nut
attached.
4. Remove the nine larger screws (Lexicon Part No.
641-11466) on the rear panel.
Bottom View of Unit
Front
Back
Screw & Nut
Inside the Unit
9 Larger Screws