MIDI Operation
Lexicon
5-6
MIDI SYSEX MESSAGES
MIDI Sysex messages can be used to access all algorithm
parameters. More information about using this advanced
feature with the MPX 200 and other Lexicon products is
available at www.lexicon.com. The website offers
instructions, sample messages, and a complete table of
parameter Sysex addresses.
Note:
Executing MIDI Sysex messages is a complicated
process. Please observe the cautionary notes
included on the website.
MIDI CLOCK
The MPX 200 recognizes MIDI Clock messages and
applies the tempo (40 to 400 bpm) to programs that use
the Tap Tempo feature. Connect a MIDI device that
outputs MIDI Clock, such as the MPX R1 Foot Controller
or a MIDI sequencer, to the MPX 200 MIDI IN connector
to have the MPX 200 automatically recognize and begin
to process MIDI Clock messages. When the tempo of the
connected device changes, the unit will automatically
adjust its delay times and modulation rates to match the
new tempo.
This feature can be disabled with the System Mode
parameter MIDI Clock Receive (see page 3-6).
MIDI DUMPS
MIDI Dumps can be used to save user programs, the
selected program, or the System Mode settings and
Learned Patch assignments to a storage device (typically
a MIDI sequencer). MIDI Dumps are performed in
System Mode (see page 3-7).
