Lexicon MPX 110, Manual

Page: 74 / 96

MIDI Operation
MPX 110
5-3
PROGRAM LOAD CHANNEL
The MPX 110 is designed to have one MIDI channel
dedicated to loading programs, called the Program Load
MIDI Channel. This allows Program Change messages to
load programs.
The Program Load channel can be the same channel that
is used to receive other Program Change messages for
Learned Patches. However, numbers 0 to 15 will always
load the 16 variations of the selected program. Program
Change messages 0 to 15 will be ignored on all other
MIDI channels.
MIDI channel 1 is the default Program Load Channel. To
assign this function to a different channel:
1. Simultaneously press the Store and Tap buttons
to activate Learn Mode. The Store LED will flash
slowly and the Tap LED will light to indicate that
Learn Mode is active.
2. Send a Program Change message to the unit. The
Edit LED will flash to indicate incoming MIDI activity.
3. The unit learns the MIDI channel of the transmitting
device, and reassigns the Program Load function to
that channel.
4. Simultaneously press the Store and Tap buttons
to deactivate Learn Mode.
The unit will remember the Program Load Channel
assignment until the Program Load Channel is
reassigned using the same procedure.